Butyl Alcohol Ethers Alkynyl Propane Sulfonates

The main use of Danzhuo Ligustrazine Injection is to promote blood circulation and remove blood stasis, and to relieve blood stasis. The main ingredients of Danzhuo and Ligustrazine are compatible with each other and play their work together.
It is used in bed. One of them can be used to block blood stasis and chest paralysis, causing tingling in the chest, immobility, especially at night, palpitations, etc. This is because it can promote blood circulation and remove blood stasis, so that the heart can be connected, and the disease of chest paralysis can be affected. Both, infarction also has good effects.
Furthermore, in terms of cardiovascular diseases, such as coronary heart pain, it is also often used. It can increase blood flow, reduce myocardial oxygen consumption, and relieve heart pain. And it can improve blood flow, reduce blood viscosity, inhibit platelet aggregation, and reduce thrombosis, so as to maintain normal blood flow.
Therefore, the effect of Danjiuligustrazine injection on promoting blood circulation and removing blood stasis and relieving blood stasis is important in the treatment of blood stasis and obstruction disorders such as cardiovascular and blood vessels.

The chemical properties of potassium ferrocyanide are as follows:
Ferrocyanide, also known as red blood salt potassium, has a dark red crystal color. At room temperature, this substance is quite stable. However, if it is decomposed by heat, it will release highly toxic cyanide gas, which requires special attention. It has a certain solubility in water, and the aqueous solution can react with many metal ions to form a characteristic precipitate, which can be used to test specific metal ions. For example, when it encounters ferrous ions, a blue precipitate will be formed. This reaction is often used in chemical analysis for qualitative detection of ferrous ions.
Potassium ferrocyanide, commonly known as potassium xanthate, has a light yellow monoitalic crystal or powder appearance. Its chemical properties are also relatively stable. When heated to 70 ° C, it loses crystalline water and turns into a white anhydrous substance. When decomposed at higher temperatures, cyanide will also be released. Potassium ferrocyanide has good solubility in water, and its aqueous solution is chemically stable, making it difficult to react easily with common metal ions. However, under certain conditions, in case of strong acid, it will react to form hydrogen cyanide gas, which is very toxic. Because of its good stability and low toxicity, it is often used as an anti-caking agent in table salt, which can effectively prevent salt from caking, protect the loose state of table salt, and is convenient for daily use.

Borax is widely used in various industries.
It was first seen in the pharmaceutical industry. In ancient times, doctors often used borax as medicine. Because of its ability to clear away heat and detoxify, reduce swelling and preservative, it is mostly used for sores on the mouth and throat, swelling and sore throat. "Compendium of Materia Medica" says: "Borax is sweet in taste, slightly salty, cold in nature, and non-toxic." It can be applied to the affected area to relieve the pain of swelling and slow down the disease of the sick.
Furthermore, it is also quite important for alchemy to burn mercury. Alchemists often use borax as a guide to refine medicine, to help its heat, reduce its impurities, and hope for the change of gold and stone. Although many of them involve falsehood, borax is also indispensable in this way, which can change the color and texture of the refine, which is important to the Dan family.
In the industry of ceramic glazing, borax is also a good aid. It can be used as a flux to reduce the melting point of the ceramic body, making it more uniform when firing, and the surface is smoother. And it can enhance the chemical stability and thermal stability of ceramics, making it durable. When glazing is fired, borax can also adjust its color, making the glaze shine and clear like ice jade, so potters and glaziers make good use of it.
In the printing and dyeing industry, borax also has a wonderful use. It can be used as a mordant to help the dye adhere to the fabric, making the dyeing firmer, the color is more vivid, and it is not easy to fade after being washed by water. It makes the weaving and dyeing products have a new color and is favored by dyeers.
As for the metallurgical industry, borax can be used as a flux to remove impurities in metal ores and make metal refining more refined. When casting, it can also improve the fluidity of the metal, making the shape of the casting more accurate and the texture more dense, which is a good supplement for craftsmen. From this perspective, the use of borax is widely used in many industries such as medicine, alchemy, ceramics, printing and dyeing, metallurgy, etc. It is beneficial to all kinds of skills and is truly a useful thing in the world.

To make a razor steel blade, the method is as follows:
First take a good iron and calcine it with fire to make it red. The iron needs to be pure in texture and have very few impurities. When the iron is hot, place it on the anvil, hit it with a sledgehammer, and beat it repeatedly to remove impurities and make the texture of the iron denser. When beating, pay attention to the shape of the iron, and do not cause it to be overly deformed and damaged.
Then, the iron is fused with a specific ore. This ore contains special ingredients, which are the key to making razor iron steel. In a special furnace, heat it with intense fire to make the iron and ore fully fused. It is extremely important to control the heat. If the fire is weak, the fusion will not be good, and if the fire is fierce, the iron will be vulnerable. When the two are completely melted into one, the molten iron will be obtained.
Next, pour the molten iron into the special mold and wait for it to cool and form. The cooling process also needs to be paid attention to, and it should not be suddenly cooled to avoid cracks. After forming, it should be polished again. First, the rough edge should be ground with coarse stone to make it have the shape of a sharp edge. Then fine stone is ground to make the blade body smooth like a mirror and sharp.
Finally, a special quenching process is applied to the blade body. The sharp edge is heated to a specific temperature and then quickly immersed in cold water or oil. This process requires accurate control of time and temperature to make the sharp edge both hard and tough. In this way, the razor-iron Wuzi steel sharp blade is made. Every step needs to be meticulous and careful, and it is difficult to form a good blade if there is a slight difference.

"On the System of Thunder Gong Cannon" says: Anyone who uses borax must be careful. Borax is cold in nature. External use clears heat and detoxifies, and internal use clears the lungs and reduces phlegm. Many people should pay attention when using it, and listen to me in detail.
First, borax is toxic. Although the toxicity is relatively mild, it should not be underestimated. When taking it internally, do not overdo it, otherwise it is easy to cause poisoning. If people eat too much borax by mistake, it may show nausea, vomiting, abdominal pain, diarrhea and other gastrointestinal discomfort; in severe cases, it can involve the central nervous system, causing headache, dizziness, convulsions, or even coma, endangering life. Therefore, unless the doctor clearly instructs, it must not be taken internally without authorization. Even if the doctor prescribes, the dose must be strictly followed, and never increase or decrease by yourself.
Second, borax is also exquisite for external use. When used for diseases of skin and mucous membranes, it is necessary to pay attention to its concentration. If the concentration is too high, it may irritate the skin and mucosa, causing local redness, swelling and pain. If you treat sores on the mouth and tongue, prepare borax for external use, the concentration must be moderate, in order to achieve the effect of clearing away heat and detoxifying, reducing swelling and relieving pain, without damaging the delicate mucosa.
Third, people who use borax should also avoid it. Borax is cold, and people with spleen and stomach deficiency and cold, if you take borax internally, it is easy to hurt the spleen and stomach yang, cause abnormal transportation and transformation of the spleen and stomach, and aggravate the symptoms of deficiency and cold, such as stomach cold pain, diarrhea, etc. Therefore, those with spleen and stomach deficiency should use borax with caution if not necessary. Even if it is used externally, it is necessary to pay close attention to the reaction after medication.
Fourth, the compatibility of borax with other drugs also needs to be cautious. When combined with certain drugs, it may interact with each other, affecting the efficacy of the drug, or even causing adverse reactions. Such as compatibility with acidic drugs, or changing the solubility of borax, affecting its curative effect. Therefore, when taking medication, doctors should carefully review the compatibility and contraindications of the drug, and patients should not combine borax with other drugs at will.